Two articles in Digital Engineering magazine describe FEMAP with NX/Nastran, by building a tie rod analysis model. This is the first of two lessons which expand on those articles.
Here are the geometry files to use if you want to build this model. Click to download:
FEMAP model file – completed, no results
Here are the videos for part 1 of the Digital Engineering article (February 2018)
Please use the play, pause and timeline slider bar in the usual way. There may be a pause while the video buffers
Video 1 (8:09):
- Interface basics
- Preparing the geometry
Video 2: (5:47)
- Materials and Properties
When both videos are completed you may replay, or move on to the next lesson using the View Next button.
Alternatively you can navigate around the course using the sidebar.
Leave a Reply